Water pumps being checked by workers

3 Things to Help You Choose an Industrial Water Pump

Water pumps are used everywhere. They are used in homes where a continuous supply of water is needed for various household activities and personal hygiene. Without them, access to water supplies can be difficult. They make everything you do inside your home easier as water is needed in almost all household activities.

Water pumps are also used by almost every industry for the supply of water for various processes such as production, industrial hygiene, residual and wastewater treatment, and many more. There are many types and models of industrial water pumps designed for different needs. Before deciding on one, there are three things to consider. Make sure that your water pumps are from a reputable supplier. You do not want some problems to arise just when you need your water pumps to work more efficiently.

1. Pumping Volume

This is one of the usual factors that determine which type of pump output that you will require. Having a clear idea of the water volume that you need to be pumped (litre per minute or cubic meter per hour) can help narrow your options. You should also consider the optimum water volume the pump needs to work properly and the diameter of the pipes in the system through which the water will pass. If the water volume in the system varies or the pump is not frequently required, one with level sensors attached can be a solution to automatically switch on and off the pump. It is important that you know what your require pump output is. Consult a professional about this so that you know what type of water pump you need for your business.

2. Water Temperature

Three black centrifugal pumpsThough most media are pumped at around 40 degrees, some higher or lower values can be needed in certain processes. When deciding on an industrial water pump, it is important that you check the temperature range it can handle.

A couple of important design features are heat discharge process and seal. If the water you need to pump is hot, pumps with spiral casing or an outlet at the top can better handle heat discharge. Pumps with spiral casing are used for pumping both cold and hot water.

3. Snoring

Snoring happens when air is suctioned as well as water. This is the case in removal points where the level of water is too low. Pump motors not equipped with features to treat this type of process can overheat easily and be prone to damage. For your existing water pumps, it is best to get the help of professionals to detect snoring. Otherwise, your water pumps will get damaged or overheat, causing bigger problems in your business.

Centrifugal water pumps are a good option for most industries. They have a simple design and usually require little maintenance, making them cost-effective as well. If you need to handle a high flow of water, this can be a good choice. Just make sure that your waster pump provider can give the right water pump that will suit all your needs.

Spread the love

About The Author

Scroll to Top