home-mat

How to Keep the Heat in and Improve Your Home’s Energy Efficiency

It doesn’t matter whether you want to buy a new build or whether you want to refurnish your home because you have to make sure that you reduce heat loss as much as possible. If you don’t then you may find that you end up paying way more for your energy bills than you should and that you also struggle to make your home cozy too. If you want to make a positive change then simply take a look below.

Where does Heat Loss Occur?

Heat loss is when heat tends to escape from the inside of the building to the outside. This normally happens through the roof, the walls, and even the windows. It doesn’t matter how much you invest in a heater or whether or not you book a heating repair for your boiler because your home will never be as warm as it could be if you do not take the right steps to stop heat loss. If you want to help yourself here, then the only thing that you need to do is take a look below. When you are looking at heated floors, you need to calculate the heat loss in a room so you can find out if it is worth the investment. If you have a low level of heat loss, then underfloor heating will most likely be enough for you to get the job done. If you have a high level of heat loss, then you may struggle to really make the room feel warm. If you want to take a positive step in the right direction, then simply take a look below.

Insulating your Home

When it comes to floors, it’s so important that you make sure that you have enough insulation. In new buildings, you probably won’t need to worry about this at all. If you have an older building however then this may not be the case. You may need to invest in cavity wall insulation, for example. This involves blowing insulating material between the brick and then the inside wall. This will reduce air circulation and it will stop as much heat from being transferred through the walls.

Insulating your Windows and Doors

If you want to reduce heat loss through your windows, then you may want to install double or triple glazing. If you can do this then you will be able to reduce any losses significantly. Generally, the gaps between your panes of glass are filled with air. Heat loss is reduced because air is a very poor conductor of heat. You can use caulking material around the door if you want but at the end of the day, it may be that you need to replace the windows entirely. This is especially the case if you only have single glazing. You can find out what windows you have by referring to the house information when you purchased your property. If you can’t do this, then a professional window installer may be able to give you the advice you need to make a good decision overall.

Spread the love

About The Author

Scroll to Top